Understanding Glycol Chiller Systems

Glycol chiller systems are widely used across UK industries where precise temperature control is required. From breweries and dairies to laboratories and manufacturing plants, these systems provide stable and controlled cooling using a glycol-water mixture as the heat transfer medium.

Unlike standard water chillers, glycol chillers use a mixture of propylene or ethylene glycol combined with water. This makes them suitable for applications operating below 0°C or installations with outdoor pipework exposed to cold weather.

At a fundamental level, glycol chiller systems remove heat from a process and transfer it away through a refrigeration circuit. The cooled glycol solution is then pumped through pipework to absorb heat from equipment or products before returning to the chiller.

How a Glycol Chiller System Works

A well-considered glycol chiller system design supports efficiency and stable operation. Core components typically include:

• Refrigeration compressor


• Heat rejection condenser


• Evaporator


• Metering device


• Integrated buffer tank and circulation pump


• Control panel

Within the evaporator, the refrigeration cycle removes heat from the circulating glycol solution. The chilled solution is then sent to the process load, absorbs heat, and flows back to the unit.

A typical glycol chiller system diagram shows the separation between the primary refrigeration loop and the secondary glycol circuit. The refrigeration loop manages heat removal, while the glycol loop delivers cooling to the equipment or product. Accurate schematics are valuable for commissioning and diagnostics.

Glycol Chiller System Control Panel

The glycol chiller system control panel acts as the central interface for monitoring and adjustment. Modern panels typically include:

• Programmable temperature regulation


• Integrated logic controllers


• High and low pressure safety switches


• Circulation pump management


• Alarm notifications


• BMS or remote access integration

The control panel regulates compressor operation, maintains setpoint temperatures and monitors system pressures. Many systems also log performance data to support service planning and operational records.

In facilities requiring precise cooling, reliable control prevents temperature drift that could affect product quality or equipment integrity.

Installing a Glycol Chiller System Control Panel

Proper glycol chiller system control panel installation is essential for safe operation and long-term reliability. Key factors include:

• Electrical compliance – Connections must align with UK wiring regulations and include suitable isolation and circuit protection.


• Location and ventilation – Panels should be located in dry, well-ventilated areas away from excessive heat, vibration or moisture.


• Commissioning procedures – Post-installation checks must include sensor accuracy, alarm testing and pump sequencing confirmation.

Commissioning ensures the unit operates in line with the original glycol chiller system design specifications.

Design Considerations for Glycol Chiller Systems

Effective glycol chiller system design begins with accurate assessment of the cooling load. Engineers evaluate:

• Target operating temperatures


• Hydraulic design and circulation requirements


• Ambient environmental conditions


• Redundancy or backup requirements


• Allowance for capacity growth

Correct sizing is essential to avoid inefficiency or inadequate cooling. Load calculations must consider peak demand and operational cycles.

Fluid selection also plays a role. Propylene glycol is commonly used in food and beverage settings due to its lower toxicity, whereas ethylene glycol can be chosen for applications prioritising thermal performance.

Additional considerations such as insulation standards, pump capacity and exchanger design influence stability, efficiency and lifespan.

Applications of Glycol Chiller Systems

Glycol chiller systems support numerous sectors across the UK, including:

• Breweries and distilleries


• Dairy and food processing facilities


• Pharmaceutical production environments


• Laser and medical equipment cooling


• Plastics processing and injection moulding


• Cold storage and preparation areas

For example, in beverage production, chillers regulate process temperatures and stabilise product storage. In manufacturing settings, they protect equipment from excessive thermal build-up.

Protecting System Performance

Routine maintenance supports consistent output and equipment longevity. Typical servicing tasks include:

• Testing fluid concentration and condition


• Assessing circulation components


• Removing debris from heat rejection surfaces


• Reviewing operational parameters


• Confirming correct refrigeration performance

Over time, glycol can lose effectiveness through dilution or contamination, reducing heat transfer efficiency. Regular testing helps maintain optimal performance.

When correctly designed, installed and maintained, glycol chiller systems can provide reliable service for many years.

Frequently Asked Questions

What glycol concentration should be used?

Most UK systems operate with a concentration between 20% and 40%.

Can a glycol chiller be installed outdoors?

Yes, provided the unit is rated for outdoor use and protected against environmental exposure.

How does a glycol chiller differ from a water chiller?

Glycol systems use a glycol-water mixture to allow lower operating temperatures and prevent freezing.

Is remote access available?

Advanced control panels often provide remote monitoring and data logging functionality.

What is the recommended testing frequency?

Annual testing is common, though high-demand systems may require more frequent checks.

Which industries benefit most from glycol chillers?

Industries requiring stable and low-temperature control frequently depend on glycol-based systems.

Final Considerations

Glycol chiller systems deliver reliable and consistent temperature control across a broad range of industrial and commercial applications. From careful glycol chiller system design to compliant control panel installation and structured maintenance, every stage affects efficiency and longevity.

Whether planning a new installation or upgrading existing equipment, engaging knowledgeable engineers helps align system capacity with process needs. For technical advice and tailored solutions, consult the Newsome glycol chillers page to explore engineered glycol cooling solutions designed for long-term performance.